Schaefer Equipment

Information

2024 H&S Manufacturing Company, Inc. S3200 Series SW3243

• Heavy 5" Channel Iron Frame w/Double Pole Channels

• Solid Virgin Grade Poly Floor

• Hydraulic Endgate w/Dual Cylinders

• Top Beater

• The heavy-duty series of H&S manure spreaders feature a massive unitized welded frame with heavy floor supports, side stakes, and wrap-around steel front corners.

• Strong rear main beater side panels are slanted for clearance and wider spread, and then welded to the strong 5" U-channel side members. Compares with any on the market.

• The side flares on all H&S heavy-duty manure spreaders are made of 10-gauge g210 culvert grade galvanized steel.

• Sides, front panel and both sides of the rear hydraulic endgate use fiberglass reinforced plywood to provide for easy cleaning and minimal freeze-up.

• The solid virgin grade poly floor allows for considerably less torque to move a heavy load.

• The two-speed apron drive is standard equipment.

• The 29" diameter beater has two styles of replaceable beater paddles. Half of the 14-beater paddles are blunt for widespread, and the other half are a sharp ripper-type for cutting and shredding. Beater side wiper blades are also standard equipment.

• The hydraulic endgate features 2 cylinders with hydraulic lines running through a 3" x 3" tube under the floor for protection. The upright position of the hydraulic cylinder stroke allows the gate to lift with the least strain at pivot points.

• Special cast steel alloy apron idler slides are used instead of idler sprockets, making for years of dependable service.

• Adjustment for the main apron is easily made by simply loosening the two side bolts and drawing up the long bolt.

• The beater drive gear box is 1:1.5 bevel gear oil bath equipped with a 4-jaw over running clutch for beater shut-off.

• The apron drive is a 50:1 bronze worm gear with shear bolt protection.

• PTO Apron Low-Speed/540 RPMs: 4' 8.5" per minute.

• PTO Apron High-Speed/540 RPMs: 8' 8.5" per minute

• The top beater provides load leveling and spreading of high heaped loads.

• The SW3243 (western) has additional features to other heavy-duty models such as double main frame channels, additional floor supports, 1045 hardened drive shaft, and #80 drive chain.

• A front splash guard is standard equipment.

• Greaseable bearings